MULTI-SENSE
“MULTI-SENSE" menu
From the “Vehicle” mode you can access “MULTI-SENSE". This menu lets you customise the behaviour of some on-board systems.
Selecting mode
Available modes may vary according to the vehicle and equipment level. From the “MULTI-SENSE” menu, select the 1 mode desired:
- “Comfort” ;
- “Eco” ;
- “Sport” ;
- “Perso” ;
- “Snow” ;
- “All Terrain” ;
-...
For more information on each of these modes, please see your vehicle user manual.
“Configure”
Press “Configure” 2 to customise the different parameters of the following vehicle systems:
- “Steering effort”;
- “Vehicle dynamics”;
- “Climate”;
- “Ambient lighting”;
-...
Note:
- some configuration menus may vary depending on the vehicle and the equipment level;
- you can also access the various modes by pressing your vehicle’s “MULTI-SENSE” control repeatedly. Please refer to the vehicle user manual for further information.
For safety reasons, carry out any adjustments while the vehicle is stationary.
“Configure” “MULTI-SENSE”
The “MULTI-SENSE” "Configure" screen includes the following tabs:
- “Driving” A shows the functions related to driving the vehicle;
- “Life on board” B shows the functions related to the on-board experience.
Note: the available settings may vary according to the “MULTI-SENSE”mode, your vehicle model and equipment level.
From the 3 tab you can “Reset mode settings”.
“Driving” settings
From the “Driving” tab A, you can configure the following equipment:
- “Engine”;
- “Steering effort”;
- “Vehicle dynamics”;
-...
“Engine”
This menu offers several engine response settings:
- “Normal”;
- “Sport”;
- “Eco”.
Depending on the setting selected, the power and engine torque become more noticeable and responsive.
“Steering effort”
This menu offers several steering response settings:
- “Low”;
- “Middle”;
- “High”.
Depending on the setting selected, the steering sensitivity can be adjusted to become more reactive or heavier in order to provide optimal balance between a smooth and accurate steering experience.
“Vehicle dynamics”
This menu, available on 2-wheel drive vehicles, offers several operation settings:
- “Normal”;
- “Comfort”;
- “Sport”.
Depending on the setting selected, the braking of the wheels varies in relation to the angle of the wheels in order to offer optimal trajectory.
“4Control”
This menu, available on 4-wheel drive vehicles, offers several operation settings. Directly adjust the level bar by sliding your finger to the left or right in order to adjust the setting.
Depending on the setting selected, the braking of the wheels varies in relation to the angle of the wheels in order to offer optimal trajectory.
“Life on board” settings
From the “Life on board” tab B, you can configure the following equipment:
- “Ambient lighting”;
- “Light intensity”;
- “Climate”;
-...
For more information on “Ambient lighting” and “Light intensity”, please refer to the “Ambient lighting” section.
For safety reasons, carry out any adjustments while the vehicle is stationary.