Back to the list

Seats/Rear view mirrors

  • 1
  • 2
  • 3
  • 4
  • 5

Seats/Rear view mirrors

From the "Vehicle" World , press "Seats" to access the seat adjustment functions "Driver" A and "Passenger" B of your vehicle :
  • « Lumbar activated » ;
  • « Seat Easy access » ;
  • « Visual feedback » ;
  • « Driving position »/« Relax position ».
You can also access the "Seats" menu directly by pressing the switch on the seat. To start the massage function, press and hold.
For more information on the seat controls, please see your vehicle user manual.
To select the "Driver" or "Passenger" seat:
  • press tab A or B;
  • quickly slide the multimedia screen sideways to move from one seat to another.

« Lumbar activated »

From the "Driver" tabs, you can select the sequence type:
  • « Low » ;
  • « Extended » ;
  • « Alternate ».
Move the cursor on the "Intensity" bar to adjust the massage "Intensity".

« Seat Easy access »

WARNING
Deactivate the "Seat Easy access" function before installing a child seat on the front passenger seat and/or on the rear seats.
Risk of injury.
When this function is activated, the seat automatically moves back when the driver and/or passenger leaves the vehicle, and returns to its position the next time the vehicle starts.

« Visual feedback »

If this function is activated, a pop-up settings window is displayed on the screen when the driver or passenger adjusts the position of their seat.

"Driving position" / "Memorised position"

« Save »
This function memorises the positions of the front seats and the door mirrors of the "Driver" and/or "Passenger".
From the "Seats" menu:
  • select the "Driver" or "Passenger" seat;
  • adjust the seat position using the switches on the seat;
  • adjust the position of the door mirrors using the window controls;
  • press "Save" to store the current position.
Using the adjustment controls for the seat concerned:
  • adjust the seat position using the switches on the seat;
  • after a few seconds, a message is displayed on the multimedia screen offering to store the new position;
  • press "Save" to save the current position or "Do not save" in order not to save the current position.
Note: the positions of the exterior door mirrors are memorised along with the position of the seats depending on the vehicle.
Please refer to the vehicle user manual for further information.
« Recall »
When the vehicle is stationary, this function can recall the stored seat and door mirror positions:
  • For the driver's seat: press "Recall".
  • For the passenger: select the desired stored "Seat position", then press "Recall".
Note: for safety reasons, certain functions are only available while the vehicle is stationary.

« Relax position »

With the vehicle stationary, you can automatically move back and tilt the driver's seat to enable a relaxing seating position while taking a break. To do this press "Activate".
You can customise the "Relax position" by adjusting the position of the seat using the seat adjustment buttons, then press "Save" to save the position.
You can interrupt the movement by pressing one of the seat adjustment buttons or by pressing "Return to driving position" on the multimedia screen.
To return your seat to the driving position, press "Return to driving position".
Note: while the vehicle is charging, a message is automatically displayed on the multimedia screen to ask if you would like to activate the position. During activation, you can access the "Relax position" settings;
WARNING
Before using "Relax position" or recalling a driving position (position memory, changing the profile), check that nobody is near any of the moving parts (in particular, in the rear seats).
Risk of injury.