Rear bench seat: functions
Rear bench seat: functions
Standard chassis version
To fold down the seatback
Ensure that the front seats are far enough forward.
Before moving the bench seat, ensure that no objects are present on the floor and
that nothing will obstruct the manoeuvre.
Make sure that no devices are connected to the accessories socket 2.
Place the seat belt in the hook 1 to prevent it from being damaged and lower the rear headrests to the storage position.
WARNING
Check that the rear seat belts are positioned and operating correctly each time the
rear bench seat is moved.
Pull the lever 3 of the seatback that you wish to fold down (on the right-hand or left-hand side of
the bench seat) and guide the seatback downwards.
To raise the seatback
Before raising the seatback, ensure that no objects (water bottle, tool box, etc.)
will prevent it from locking properly and that the seat belt is correctly placed in
its hook.
Raise the seatback and click it into position. Check that it is correctly locked.
Restriction of use
It is forbidden to drive with a seatback or a front seat folded down when there is
a passenger occupying a rear seat.
WARNING
When moving the rear seats, ensure that nothing obstructs the anchorage points (passenger's
arm or leg, a pet, gravel, cloth, toys, etc.).
WARNING
For safety reasons, carry out any adjustments while the vehicle is stationary.
WARNING
When refitting the seatback, make sure it is correctly locked in place.
If seat covers are fitted, make sure these do not prevent the seatback latch from locking in.
Make sure that the seat belts are positioned correctly.
Reposition the headrests.