Back to the list

FRONT SEATS

  • 1
  • 2
  • 3
  • 4
  • 5

To move forwards or backwards

Depending on the seat, lift bar 1 or handle 4 to release it. Release the handle at the desired position and make sure that it is locked.

Adjusting the height of the driver’s seat

Move lever 3 as many times as necessary:

- upwards to raise the seat,

- downwards to lower the seat.

To tilt the seatback

Depending on the seat, lower or lift lever 2 and tilt the seatback until it reaches the required position.

For safety reasons, carry out any adjustments when the vehicle is not being driven.

After making adjustments, make sure that the seatbacks are correctly locked in place.

To avoid all risk of injury, ensure that nobody is in the proximity of the moving parts. When moving the seat, make sure that nothing interferes with the moving parts and their locking.

For safety reasons, carry out any adjustments when the vehicle is not being driven.

We would advise you not to recline the seatbacks too far to ensure that the effectiveness of the seat belts is not reduced.

Make sure that the seatbacks are correctly locked in place.

Nothing should be placed on the floor (area in front of driver) as such objects may slide under the pedal during braking manoeuvres, thus obstructing its use.

ð Heated seats

Ignition switch to a position other than the “Stop and steering lock” position St, press switch 5, an indicator light will come on.

Operating faults

(depending on vehicle)

If the sliding side door does not work, lower handle 6, hold it while the seatback tilts and slide the seat forwards.

To place the seat into the comfort position, slide it rearwards.

Adjust the seat and make sure that it is correctly locked.