Back to the list

HANDS-FREE ACCESS TRANSMITTER, RECEIVER: use

  • 1
  • 2
  • 3
  • 4
  • 5

For vehicles equipped with transmitter/receiver 1, in addition to the functions of the remote control, it can be used to lock/unlock without using the remote control locking unit when it is in access zone 2.

Note: the hands-free access transmitter/receiver only works with the front doors and the tailgate.

It is powered by a battery which must be replaced (refer to the information on the “Hands-free access transmitter/receiver: batteries” in Section 5).

Driver’s responsibility when parking or stopping the vehicle

Never leave an animal, child or adult who is not self-sufficient alone on your vehicle, even for a short time.

They may pose a risk to themselves or to others by starting the engine, activating equipment such as the electric windows or locking the doors.

Also, in hot and/or sunny weather, please remember that the temperature inside the passenger compartment increases very quickly.

RISK OF DEATH OR SERIOUS INJURY.

Interference

Interference by factors in the immediate vicinity (external installations or the use of equipment operating on the same frequency as the remote control) may affect the operation of the remote control.

Unlocking the vehicle

With the transmitter/receiver in one of the access zones 2, press button 3 or 4, and all the doors will unlock.

The hazard warning lights flash once to indicate that the doors have been unlocked.

Locking the vehicle

With the transmitter/receiver in one of the access zones 2, press button 3 or 4, and all the doors will lock.

The hazard warning lights flash once for 4 seconds to indicate the doors have been locked.

Note: when a door or the tailgate is left open or is not properly closed, all the doors and the tailgate lock/unlock quickly without the hazard warning lights flashing.