Back to the list

WHEEL TRIM

  • 1
  • 2
  • 3
  • 4
  • 5

Wheel trim

Remove it using the hubcap tool 3 by connecting the hook in the recess provided next to the valve 1 (to attach the metal clip).

Note: if you are using anti-theft bolts, refer to the information on “Changing a wheel”.

To refit it, align it with the valve 1 and the wheel bolts 2. Push in the centre of the wheel trim to clip the centre section around the wheel bolts. Push in the retaining hooks located around the edge of the trim. Firmly push in the centre of the wheel trim again to ensure that the central clips locate correctly above the heads of the wheel bolts.

Note: if your vehicle is fitted with anti-theft bolts, always fix them in place of one of the wheel bolts 2.