Do not leave the tools unsecured inside the vehicle as they may come loose under braking. After use, check that all the tools are correctly clipped into the tool kit, then position it correctly in its housing: there is a risk of injury.
The jack is designed for wheel changing purposes only. Under no circumstances should it be used for carrying out repairs underneath the vehicle or to gain access to the underside of the vehicle.
Nothing should be placed on the floor area in front of the driver as such objects may slide under the pedal during braking manoeuvres, thus obstructing its use.
The tools included in the tool kit depend on the vehicle. The tool kit 2 is located under the driver’s seat. To remove it, move the seat forward and fold down the seatback (refer to the information on the “Front seats” in Section 1). Unscrew the mounting screw 1 from the unit and swivel to extract.
Fold it correctly before refitting it in its housing (ensure that the wheelbrace is correctly positioned).
Wheel bolt anti-theft piece 4.
Hubcap tool 5
This tool is used to remove the wheel trims.
Offset wrench 6.
This locks and unlocks the wheel bolts and the emergency spare wheel holder.
Tow eye 8
Please see “Towing: breakdown recovery” in Section 5.