TRIP COMPUTER AND WARNING SYSTEM: journey parameters

  • 1
  • 2
  • 3
  • 4
  • 5

The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.

Examples of selections

Interpreting the display selected

Consumption

a) Trip settings.

Current energy consumption.

+ 13,4

kWh

Average energy consumption.

The value is displayed after having travelled at least 400 metres since the last reset.

12,8

kWh

Journey

Average speed since the last reset.

The value is displayed after driving 400 metres.

42,2

km/h

1284,7

Distance travelled since the last reset.

km

The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.

Examples of selections

Interpreting the display selected

b) Tyre pressure reset TYRE PRESSURE MONITOR

+

Tyre pressure

12:00

c) Clock

The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.

Examples of selections

Interpreting the display selected

Service in

d) Service interval.

Distance remaining until the next service (displayed in miles/kilometres), then when the service nears, several scenarios are possible:

- range less than 930 miles (1,500 km) or one month: the message “Service in” is displayed accompanied by the distance or the time;

- when a service is due, the message “Service due” is displayed accompanied by the nearest term (distance or time);

- range equal to 0 miles (0 km) or date of service reached: the message “Service Required” is displayed accompanied by the warning light ©.

The vehicle requires a service as soon as possible.

1,210 miles

or 3 months

Resetting the display after the service in accordance with the maintenance schedule.

The service interval must only be reset after a service which complies with the recommendations in the maintenance schedule.

Special note: To reset the service interval, press and hold one of the display reset buttons for approximately 10 seconds until the display shows the mileage permanently.

The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.

Examples of selections

Interpreting the display selected

Settings

(OK)

e) Vehicle settings personalisation menu VEHICLE SETTINGS CUSTOMISATION MENU.

Tailgate open

f) Trip log.

Successive display:

- information messages;

- operating fault messages.

USING SPEED ALERT WITH TRAFFIC SIGN RECOGNITION